Atlona AT-PA100-G2 User Manual download pdf (Page 4)

Input Ports 2 x RCA connectors

1 x 3.5mm Audio

1 x 3.5mm IR

1 x Captive Screw MIC

1 x Captive Screw RS-232

Output Ports 1 x Captive Screw Audio

1 x 3.5mm Loop Out

Dimensions (HxWxD) 1.5 x 3.78 x 3.43 (inch) or 38 x 96 x 87 (mm)

Weight 0.66lbs or 0.3kg

Power consumption 3.6W

Audio

Gain: 32dB

Frequency Range: 20Hz to 20KHz

Signal/Noise Ratio: 80dB (at max output)

Total Harmonic Distortion: 1% (1KHz), 0.3% (20KHz) -- at nominal levels

Input Impedance: Input 1&2: >10KΩ

MIC Input Impedance: 48V: 35KΩ

MIC: 10KΩ

LINE: 75KΩ

Output Impedance: 3.5mm Loop Out: 50Ω stereo

Speaker out: 4 ~ 8Ω Amplifier

Stereo Channel Separation: >75dB from 20Hz to 20KHz

Common Mode Rejection Ratio: >70dB from 20Hz to 20KHz

MIC Audio Detection Delay: 1ms

1 2

4 5 6 7

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Specifications

Panel Description

Front Panel

1. Audio output format switch: Use to switch between Stereo, Dual Channel Mono, and

Bridged audio outputs

2. 3.5mm IR: Connect optional IR receiver here for use with optional IR remote (AT-PA1-IR)

3. Captive Screw RS-232: Connect RS-232 here for control

4. Captive Screw Input: Connect a MIC

5. Audio input switch: Switch between 48V Phantom powered condenser MIC, Dynamic

MIC, or LINE

6. L/R audio: Connect Analog audio into this port

7. 3.5mm audio: Connect Analog audio into this port

1 2 3 4 5 6 7 8 9 ... 12 13

No comments

Atlona AT-PA100-G2 User Manual Page 4