Atlona AT 3GSDI500 User Manual download pdf (Page 8)

www.atlona.com | toll free: 1-877-536-3976

For International: 1-408-962-0515

6.3. Output Panel

3 4 5

3. SDI OUTPUT A: Connect to a SDI device for SDI, HD-SDI, or 3G-SDI signal output either from the chosen

pattern or the converted HDMI

source signal

4. Lock LED: showing if the audio/video signal existed or not

5. SDI OUTPUT B: Connect to a SDI device for SDI, HD-SDI, 3G-SDI signal output either from the chosen

pattern or the converted HDMI

source signal

6.4. Bottom Panel

A 4-pin DIP switch is used for user interface, and users can access this switch from the bottom of the unit.

Pin No. 1 2 3 4

ON (

↑

)

Used for SMPTE352M

3G level B 10 Update EDID

OFF (

↓

) 3G level A Not in use Default EDID

1. Factory default for 4-pin DIP switch: OFF-OFF-OFF-OFF [

↓

]

2. In order to keep the compatibility of HDMI

to most monitors, AT-3GSDI500 features EDID learning ability.

The operation is shown in the EDID LEARNING section.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Atlona AT 3GSDI500 User Manual Page 8