Atlona AT DVI MATRIX User Manual download pdf (Page 9)

Atlona Technologies www.atlona.com 9

LCD display: Real time monitor of the operations and status

“0, 1,9” Keypad: Keys to select I/O channels and save/recall preset commands

“AV” AV synchronal button: To transfer video and audio signal synchronously by the switcher.

Example: To transfer both the video and the audio signals from input channel No.3 to

output channel No.6.

Operation: Press buttons in the following order “3”, “AV”, “6”, “END”, “ENTER”

“VIDEO” Video button: To transfer only video signals from input channel to output channel.

Example: To transfer video signals from input channel No.3 to output channel No.10.

Operation: Press buttons in the following order “3”, “VIDEO”, “1”, “0”, “END”, “ENTER”

“AUDIO” Audio button: To transfer only audio signals from input channel to output channel.

Example: To transfer audio signals from input channel No.12 to output channel No.6.

Operation: Press buttons in the following order “1”, “2”, “AUDIO”, “6”, “END”, “ENTER”

“ / ” Break button: To break different channels in a command

Example: To transfer video and audio signals from input channel No.1 to output

Channel No.2, 13, 6 at the same time

Operati on: Press buttons in the following order “1”, “AV”, “2”, “/”, “1”,“3”, “/”, “6”, “END”,

“ENTER”

“END” Ending command button: Use when the command input has been ﬁnished.

“ENTER” Execute Command: To perform a command after inputting it

“ALL” All button: To transfer an input channel to all output channels or switch off all output channels.

Example 1: To transfer video and audio signals from input channel No.7 to all output channels

Operation: Press buttons in the following order “7”, “ALL”

Note: Commands “END” & “ENTER” do not need to be used after this command.

Example 2: To transfer all input signals to the corresponding output channels

In another word, to switch to this status: 1->1, 2->2, 3->3, 4->4……16->16.

Operation: Press buttons in the following order “ALL”, “1”

Example 3: To switch off all the output channels.

Operation: Press buttons in the following order “ALL”, “2”

“SAVE” Save button: To save the present operation to a preset command

Example: To save the present operation to the preset command No.2

Operation: Press buttons in the following order “SAVE”, “2”

Note: There are altogether 10 preset commands ranged from No.0 to No.10.

5.4 Front Control/ Operation

Atlona AT DVI MATRIX User Manual Page 9