Atlona AT HD BIR40SR User Manual download pdf (Page 7)

www.atlona.com | toll free: 1-877-536-3976

For International: 1-408-962-0515

5.2. Receiving Module

5.2.1. Front Panel

+5V DC: Connect to 5V DC power supply unit either at the Receiver Unit or the Sender Unit. Powered at one end is

enough to supply the whole extender set.

AUDIO VIDEO: Connect a Cat-5/5e/6 cable to the AUDIO/VIDEO port on the sender unit

CONTROL CHANNEL: Connect a Cat-5/5e/6 cable to the CONTROL CHANNEL port on the sender unit

5.2.2. Rear Panel

IR RECEIVER: 3.5mm infrared socket for plugging in the extension cable of IR receiver

IR BLASTER: 3.5mm infrared socket for plugging in the extension cable of IR blaster

HDMI OUT: Connects to a HDMI display or projector with a HDMI male-male cable

EQ: Adjust the 8-level signal equalization control to the received HDMI signals. The HDMI signal level varies from

MAX (strongest) to MIN (weakest) for respective transmission length from longest possible range to short

distance. Dial the EQ from MIN to MAX and stop turning the rotary switch whenever the audio/video is playing

normally. Inappropriate signal level setting may cause overpowering issues that would shorten the product's life

signicantly!

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Atlona AT HD BIR40SR User Manual Page 7