Atlona AT HDCAT V2 User Manual download pdf (Page 5)

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Tip (+)

Analog Audio

A captive screw analog audio connector is provided to ensure a more reliable and secure

connection. The captive screw connector supports balanced and unbalanced audio output.

Balanced audio connections use two signal wires and a ground to minimize interference to an audio

signal over longer cable runs. Unbalanced audio connections use two wires for connection with

consumer audio components.

Important! With unbalanced connections a jumper is needed between ground and negative to reduce noise

Note: Pin outs may vary, please refer to the audio device’s manual to ensure a correct connection.

Important! When terminating cables, please ensure exposed adjacent wires do not touch. This may result in

a short that can damage connected devices.

XLR

RCA

Sleeve ( Ground)

2 ( + )

3 ( - )

1 ( )

L / R

BALANCED UNBALANCED

L / R

+ +

1 2 3 4 5 6 7 8 9 10 11

No comments

Atlona AT HDCAT V2 User Manual Page 5