Atlona AT LINE PRO5 GEN2 V3 User Manual download pdf (Page 5)

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Remote Control

Back Panel

1. POWER ON/OFF: Press these buttons to power on the device or to set it

to standby mode.

2. Input Selection: Press to switch between sources.

3. Exit: Press to exit from a sub menu or main menu.

4. On Screen Display operation. Press to increase/decrease the setting value

of a selected parameter. OK (Enter): Press to confirm your selection.

5. Reset: Press the button to reset the unit’s firmware setting to the factory

default.

6. Output Resolution: Press to directly select output resolution. For other out

put resolutions that are not available on the remote please enter On

Screen Display Menu to select them.

7. MENU: Press to bring up On Screen Display.

8. Auto Adjust: Press to optimize the position of the picture (picture

centering) on the screen.

1. RS-232: Connect to a 3rd party control system or a computer with this port.

2. 3.5mm Stereo audio out - send stereo audio through to an amp (i.e. AT-PA100-G2)

3. HDMI Out - Mirrored outputs, connect to a display with HDMI or an HDMI to DVI connector (such

as AT14048 which has a compatible locking connector to secure the connection).

4. HDMI In - Connect the HDMI sources here or DVI sources with an HDMI to DVI adapter (i.e. AT-14050)

5. 3.5mm Stereo In - Audio in port used for audio when using an HDMI to DVI adapted source.

6. DVI In & Stereo In: Connect to computer video sources. Use the 3.5mm stereo audio input to

transfer audio through as well.

7. VGA In & Stereo In: These slots are for input sources such as Laptops, Desktop Computers,

Document Cameras or any other VGA source. Each VGA input is accompanied with a 3.5mm

stereo audio input.

8. COAX and RCA R/L ports: These ports are to embed analog (RCA R/L) and digital (coaxil) audio

signals from any source.

9. Y/PB/PR : These ports are to connect input sources such as DVD players, Cables Boxes or HD

Cameras.

10. CV & Stereo In: These ports are to connect to input sources such as VCRs or Security Cameras.

11. DC 5V: This port is to connect to the supplied power supply.

1098

1 2 3 4 5 6 7 8 9 10 ... 13 14

No comments

Atlona AT LINE PRO5 GEN2 V3 User Manual Page 5