Atlona AT-HD120 User Manual download pdf (Page 4)

www.atlona.com | toll free: 1-877-536-3976

For International: 1-408-962-0515

PANEL DESCRIPTION

5.1. Front Panel

5.2. Rear Panel

1. Composite video (BNC) in: Connect the input port of the AT-HD120 to the output port of a source such as a

VCR or DVD. Use the included BNC to RCA adaptor when using a cable with an RCA connector.

2. Stereo Audio 1/8 inch (3.5mm): Connect the input port of the AT-HD120 to the output of a source such as a

VCR or DVD. You will need a 1/8 (3.5mm) stereo audio to L/R RCA connector cable.

3. Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet. Green light is

on when connected.

1. Resolution select: Press and release the grey button repeatedly to select the highest resolution your dis-

play monitor will accept.

Your options are computer display 1024 X 768 (XGA), 1280 x 1024 (SXGA) 1600 X 1200 (UXGA) 60hz only

and 480p, 576p (50hz only), 720p, 1080p 50/60hz for HDTV.

2. PC/HD Select: select PC mode if connected to a computer monitor; if connected to an HDTV or projector

select HD mode.

3. HDMI out: Connect the HDMI output port of the AT-HD120 to the HDMI input port of your display monitor.

You will need a male to male (type A) HDMI cable for this connection.

1 2 3

1 2

1 2 3 4 5 6 7

No comments

Atlona AT-HD120 User Manual Page 4