Atlona AT HDVS RX User Manual

User ManualAtlona HDBaseT to HDMI Receiver/Scaler with Audio De-EmbeddingAT-HDVS-RXatlona.comToll free: 1-877-536-3976Local: 1-408-962-0515

10CommandsThe command codes are case sensitive, do not change capitalization, spacing, or lettering.Command Parameters DescriptionWP_DisplaySet[a,b,c,

11Note: 1. Each command and feedback is terminated with a carriage return. 2. Spaces aren’t allowed except in projector display on/off command

12Connection and Installationoratlona.comToll free: 1-877-536-3976Local: 1-408-962-0515L-+-+-+RHDMI OUTAUDIO OUTCAT5e/6/7 IN FIRMWARE DC 24VRS232MENU+

13Bandwidth 6.75GbpsPortsVideo inputVideo outputAudio outputRS-232Firmware updatePower1 x HDBaseT1 x HDMI1 x captive screw (balanced analog)1 x 3.5 mm

14Safety InformationSafeguardsPrecautionsFCC regulations state that any unauthorized changes or modifications to this equipment, not expressly approve

15Atlona, Inc. (“Atlona”) Limited Product Warranty PolicyCoverageAtlona warrants its products will substantially perform to their published specificat

16Atlona, Inc Product RegistrationThank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register

21. Introduction ... 32. Package Contents ...

3atlona.comToll free: 1-877-536-3976Local: 1-408-962-0515IntroductionAtlona HDVS receiver box was designed to smooth the transition from analog to dig

4atlona.comToll free: 1-877-536-3976Local: 1-408-962-0515L-+-+-+RHDMI OUTAUDIO OUTCAT5e/6/7 IN FIRMWARE DC 24VRS232MENU+-POWERLINKL-+-+-+RHDMI OUTAUDI

5Menu Option Sub-Menu Option AdjustInput Select VGAHDMIHDMI 2 (AT-HDVS-TX)Menu BackOutput Resolution 1024x768 720p59.94 1080p601280x800 720p60 Native1

6Menu Option Sub-Menu Option AdjustOSD Position Left-Top, Right-Top, Right-Bottom, Left-Bottom, CenterTransparency 0 (transparent) to 15 (solid)Info.

7RS-232ConnectionRS-232 is connected through a 9-pin female DB connector. Only pins 2, 3, and 5 are terminated.No. Pin Function1 ---- Not used2 Rx Rec

81. Save: Allows a display’s settings to be saved for easy set up in the future Load: A previously saved display’s settings2. RS-232 port - Set to

9 ProJSW Mode: Used with a projector whose lamp cannot be turned on for up to 5 minutes after being shut off. Keeps control in same state as projec